Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

10. Adımdaki Değişiklikler

Düzenleyen: PJ Blank

Düzenlenme reddedildi tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Removing the motherboard requires disconnecting several connectors.
[* black] Being as careful as we possibly could be, we use an [product|IF145-185|iFixit Tech Knife|new_window=true] (more commonly known as a K-nife) to detach the rocker buttons from the side of the panel assembly.
[* icon_reminder] As much as we love [guide|7048|using knives to cut into devices|stepid=29881|new_window=true], we heavily advise against it in most cases.
[* black] At bottom left (near the power switch), there is one screw that needs to be removed before the motherboard is free. It is the "little black dot" at bottom-left of mobo in the main picture of this step.
[* black] Note that there appear to be exactly 2 different screw types in this phone, and this screw is the 2nd type. There are only 3 of these screws; the other two are the ones under the rubber plugs in the speaker assembly (see step 15).