Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Repeat this procedure with the nextadjacent battery cell in.
[*
cell:
[*
black] PushApply a small amount (about 1 ml) of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
[* black] Alternatively, re-heat this section with your iOpener if needed.
[* black] Push a plastic
card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.
[* black] Repeat this procedure with the nextadjacent battery cell in.
[*
cell:
[*
black] PushApply a small amount (about 1 ml) of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
[* black] Alternatively, re-heat this section with your iOpener if needed.
[* black] Push a plastic
card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.