Ana içeriğe geç

11. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Insert a second plastic opening tool betweenRepeat the far leftabove procedure to separate the two leftmost battery cell andcells from the upper case, cuttingcase.
[* black] Remember to apply a small amount (about 1 ml) of
adhesive about an inch deep.
[*
remover to each battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
[*
black] Gently pryUse a second plastic card to separate the left-mosttwo leftmost battery cell upcells from the upper case.
[* icon_caution] If you encounter significant resistance, stop and use the iOpener to re-heat the battery cells.
[* black] Insert a second plastic opening tool betweenRepeat the far leftabove procedure to separate the two leftmost battery cell andcells from the upper case, cuttingcase.
[* black] Remember to apply a small amount (about 1 ml) of
adhesive about an inch deep.
[*
remover to each battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
[*
black] Gently pryUse a second plastic card to separate the left-mosttwo leftmost battery cell upcells from the upper case.
[* icon_caution] If you encounter significant resistance, stop and use the iOpener to re-heat the battery cells.

Resim 3

Eski Sürüm

Yeni Sürüm