Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.
[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
[* red] Connect the long-sleeved cable to the center socket.
[* orange] The short-sleeved cable connects next to the screw.
[* yellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.
[* icon_reminder] When reconnecting the antenna cables, run them over the camera cable, not underneath.