Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Yajur Duddala

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Side the back cover on.
-[* black] Screw the screw in.
-[* black] Pop the battery back in.
+[title] Closing it Up
+[* black] Slide the base cover back on, inserting it with a 1cm gap protruding off of the edge opposite to the battery, then push the base cover towards the battery until the screw holes align and there are no gaps.
+[* black] Tighten the captive screw in the middle. Once tightened, check to make sure the base doesn't slide off again.
+[* black] Slide the battery in until you hear a click and it cannot be removed.