Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Once all the contacts are desoldered, the old joystick can be removed.
[* black] Check that all the holes are cleared of old solder. Hypodermic needles as well as very small drill bits can be used to clear the holes.
[*
black] Insert wisdom herethe new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.
[* black] Once all the contacts are desoldered, the old joystick can be removed.
[* black] Check that all the holes are cleared of old solder. Hypodermic needles as well as very small drill bits can be used to clear the holes.
[*
black] Insert wisdom herethe new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.