Skip to main content

1. Adımdaki Değişiklikler

Düzenleyen: Sam

Onay bekleniyor


Adım Satırları

[* black] With the case, LCD screen, and release button housing removed, the logic board can be accessed and removed for replacement or repair.
[* black] Begin by using the Philips #00 screwdriver to remove two silver 0.1225in screws and three silver 0.150in screws from the back and top of the camera.
[* red] You will have to lift the Function button and its wiring up from the pins holding it in place to access some of the screws.