Skip to main content

12. Adımdaki Değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı by Philip Le Riche

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Gently lift off 2 snap-on connectors at the top of the main logic board, and two on the left hand side next to the lens assembly.
[* black] Disconnect a ribbon from a connector behind the on/off button.
[* black] Gently lift off 2 snap-on connectors on the left hand side next to the lens assembly. (Two more at the top of the board can be left in place.)
[* black] You can now separate the logic assembly, battery compartment and top control panel as a unit from the lens and flash assembly. You will need to gently ease the red-eye LED out of its slot in the lens assembly.

Resim 1

Eski Versiyon

Yeni Versiyon

Resim 2

Eski Versiyon

Yeni Versiyon