Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[*
black] InsertSlide a battery isolation pick underneath the battery connector to disconnect it fromarea of the logic boardboard, and leave it in place while you work.
[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[*
black] InsertSlide a battery isolation pick underneath the battery connector to disconnect it fromarea of the logic boardboard, and leave it in place while you work.