3. Adımdaki Değişiklikler
Adım Satırları
| [* black] Using a spudger, wedge the flat tipped end between the black bar and the circuit board. | |
| [* black] Carefully lift the black bar into the vertical position. | |
| [* black] Repeat first two bullet points for the circuit board port directly to the left of the one shown in this picture. | |
| - | [* black] Use tweezers to carefully pull the electrical ribbons from the circuit board ports. |
| + | [* black] Use [product|IF145-020|tweezers] to carefully pull the electrical ribbons from the circuit board ports. |