Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Display assemblyThe screen remains.
[* icon_reminder] The Touch ID function will '''ONLY''' work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old display assemblyscreen to your new display assemblyscreen to retain Touch ID.
[* black] Display assemblyThe screen remains.
[* icon_reminder] The Touch ID function will '''ONLY''' work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old display assemblyscreen to your new display assemblyscreen to retain Touch ID.
[* icon_reminder] Your replacement part may come with an [https://d3nevzfk7ii3be.cloudfront.net/igi/gXF4ssVeJA5Ox42x|extra Phillips screw|new_window=true] already installed left of the Home Button. Remove the unnecessary screw so that you can reinstall the home button bracket.
[* icon_note] After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.
[* icon_caution] After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.