Ana içeriğe geç

15. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 1.9 mm Phillips screws
[* orange] One 2.3 mm standoff screw
- [* icon_note] Use a small flathead screwdriver to remove these standoff screws.
- [* icon_reminder] During reassembly, you can use the tip of a spudger to get the standoff screw started.
+[* icon_note] Standoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.