Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Terrance

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Drill four 1.5mm~2mm(1/16"~5/64") diameter, 3mm(1/8") deep holes at the left and right side of panel at the position corresponding to original LCD panel. Do NOT drill the glass!!.
[* black]
2 will drillbe drilled on metal and then plastic, 2 on plastic. As said before, the metal is ''very hard''! use high quality drill and be patient and avoid ''overheating'', or you'll burn your hand or the plastic and LCD glass.
[* black] Drill four 1.5mm~2mm(1/16"~5/64") diameter, 3mm(1/8") deep holes at the left and right side of panel at the position corresponding to original LCD panel. Do NOT drill the glass!!.
[* black]
2 will drillbe drilled on metal and then plastic, 2 on plastic. As said before, the metal is ''very hard''! use high quality drill and be patient and avoid ''overheating'', or you'll burn your hand or the plastic and LCD glass.
[* black] In these pics, the upper LCD is the original one, the bottom one is HV121P01.