1. Adımdaki Değişiklikler
Düzenleyen: jwkc2 —
Düzenleme onaylandı tarafından Jake Devincenzi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. |
| [* icon_note] Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo. |
| [* black] Use a plastic opening tool to gently disconnect the battery connector from its socket. |
Resim 2
Silindi