Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart —

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then
[* icon_note] Pry from the top and bottom of the connector. Do not pryconnector bracket—there isn't as much of an overhang on the sidessides, and you may damage the connector.
[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then
[* icon_note] Pry from the top and bottom of the connector. Do not pryconnector bracket—there isn't as much of an overhang on the sidessides, and you may damage the connector.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.