Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Brian Rose

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Use an iPod opening tool to slightly lift the top edge of the connector cover away from the logic board.
[* black] Use the tip of a spudger to pull the connector cover retaining clips away from the inner frame.
[* black] Remove the connector cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. '''Do not''' clean the connectors themselves with Windex.
[* red] Be careful not to detach a small metal grounding clip.
[* orange] Be careful not to dislodge this small metal nut.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm