Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Chavdar Sirakov

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Use an iPod opening tool to slightly lift the top edge of the connector cover away from the logic board.
[* black] Use the tip of a spudger to pull the connector cover retaining clips away from the inner frame.
[* black] Remove the connector cover from the iPhone. Make sure you don't lose the metal clips on the top of the cover where the 4.8mm screw attaches. That's the primary reason for abnormal Wi-Fi performance after the reassembly.
[* black] Remove the connector cover from the iPhone. Make sure you don't lose the metal clips on the top of the cover where the 4.8mm screw attaches. That's the primary reason for abnormal Wi-Fi performance after the reassembly.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. '''Do not''' clean the connectors themselves with Windex.