Ana içeriğe geç

11. Adımdaki Değişiklikler

Düzenleyen: Jen Robinson

Düzenlenme reddedildi tarafından Andrew Optimus Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Use the edge of a plastic opening tool to gently pry the following connectors up and out of their sockets on the logic board:
[* icon_caution] When prying off the Headphone jack/volume button cable, note the silver jumper right above the yellow outline in photo. If this is broken/pried off, it will render the front facing camera inoperative and soldering is required to fix it.
[* red] Digitizer cable (pry from bottom)
[* orange] LCD cable (pry from bottom)
[* yellow] Headphone jack/volume button cable (pry from top)
[* green] Top Microphone/sleep button cable (pry from top)
[* blue] Front camera cable (pry from top)