Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: jkgarrett17

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.
[* red] The rubber guard goes on the Logic Board above the Digitizer and LCD Ribbon connectors as pictured in the second picture in red.

Resim 2

Önceki resim yok

Eklendi