Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Seth Robertson

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly. Note that the rubber bumper is not symmetrical. The thinner side needs to face up or toward you as you reassemble the phone.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly. Note that the rubber bumper is not symmetrical. The thinner side needs to face up or toward you as you reassemble the phone.