Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: ihab taha

Düzenleme onaylandı tarafından ihab taha

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Remove Bolt on Crankshaft Position Sensor
[* icon_caution] Make sure the car has not been used in a couple hours. If it has been used recently its parts will still be hot.
[* red] Lay under the car and locate the crank shaft position sensor. The sensor is located between the engine and the transmission near the front driver's side wheelwheel.
[* black] Use the 10mm wrench or socket wrench to loosen the 10mm Hex Head bolt attaching the crankshaft position sensor to the car.
[* red] Lay under the car and locate the crank shaft position sensor. The sensor is located between the engine and the transmission near the front driver's side wheelwheel.
[* black] Use the 10mm wrench or socket wrench to loosen the 10mm Hex Head bolt attaching the crankshaft position sensor to the car.