Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: ihab taha

Düzenleme onaylandı tarafından ihab taha

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Remove Crankshaft Position Sensor
[* icon_note] Note the correct position of the sensor so you will be able to insert the new sensor later on.
[* black] After you have removed the 10mm Hex Head bolt on the sensor pullsensor, pull the sensor out of place with some force. (itThe sensor should pop right out)
[* black] After you have removed the 10mm Hex Head bolt on the sensor pullsensor, pull the sensor out of place with some force. (itThe sensor should pop right out)
[* red] Unplug the sensor from the wiring harness by squeezing the release clip and pulling hardly on the sensor.