Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: bushing

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use an XACTO Knife to cut on the line you traced.
[* black] It can be difficult to control the knife when applying enough force to cut through the plastic, so I recommend going lightly for the first couple of times to make a grove, then applyinggroove. Once you have a properly-shaped groove, go back and apply more force to make the cut deeper. As it is very difficult to control the knife when applying the force needed to cut through the plastic.
[* black] When you are nearly done, flip the SIM-Card over and complete the cuts, it is much easier than tryingover. You should be able to cut it allsee the outline of the cutout you made on the top side. For a cleaner result, finish cutting the slot from onethe bottom side.
[* black] Then removeRemove the piece you cut outout of the SIM.
[* black] It can be difficult to control the knife when applying enough force to cut through the plastic, so I recommend going lightly for the first couple of times to make a grove, then applyinggroove. Once you have a properly-shaped groove, go back and apply more force to make the cut deeper. As it is very difficult to control the knife when applying the force needed to cut through the plastic.
[* black] When you are nearly done, flip the SIM-Card over and complete the cuts, it is much easier than tryingover. You should be able to cut it allsee the outline of the cutout you made on the top side. For a cleaner result, finish cutting the slot from onethe bottom side.
[* black] Then removeRemove the piece you cut outout of the SIM.