Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

5. Adımdaki Değişiklikler

Düzenleyen: bushing

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] PutInsert your Micro-SIM Card into the hole you cutcut out of the SIM.
[* black] If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole
.
[* black] If you cut the hole slightly too big, like i did, put a piece of tape over the back of the SIM-Card and cut it out of(the side without the tapegold contacts) to hold the Micro-SIM in place. Trim away any excess tape with the knife.
[* black] I recommend doing this either way, as it would be badicon_note] You may want to add some tape even if the hole is the correct size; this will help prevent the Micro-SIM got stuck in your phonefrom coming loose inside the phone and getting jammed when you try to remove it.
[* black] PutInsert your Micro-SIM Card into the hole you cutcut out of the SIM.
[* black] If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole
.
[* black] If you cut the hole slightly too big, like i did, put a piece of tape over the back of the SIM-Card and cut it out of(the side without the tapegold contacts) to hold the Micro-SIM in place. Trim away any excess tape with the knife.
[* black] I recommend doing this either way, as it would be badicon_note] You may want to add some tape even if the hole is the correct size; this will help prevent the Micro-SIM got stuck in your phonefrom coming loose inside the phone and getting jammed when you try to remove it.