1. Adımdaki Değişiklikler
Düzenleyen: Trelawney Bullis —
Düzenleme onaylandı tarafından Trelawney Bullis
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Removing Side Screw | |
| [* black] Once the cocking lever is removed, place the carbine with the saddle ring and leather thong facing upwards. | |
| [* black] Locate the screws on either side of the saddle ring. | |
| [* black] Place your less dominant hand on the underside of the carbine, below the located screws. | |
| [* black] Using a #2 Phillips Screwdriver, twist in a counter-clockwise motion. | |
| - | [* black] |
| + | [* black] Completely remove the two screws. |
| [* icon_caution] Be wary of the two washers that should now be in your hand. |