1. Adımdaki Değişiklikler
Düzenleyen: Tim Murphy —
Düzenleme onaylandı tarafından Tim Murphy
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Removing Side Screws | |
| [* black] Once the cocking lever is removed, place the carbine with the saddle ring facing upwards. | |
| [* red] Locate the screws on either side of the saddle ring. | |
| [* black] Using a #2 Phillips Screwdriver, twist in a counter-clockwise motion. | |
| [* black] Completely remove the two screws. | |
| - | [* icon_caution] Be wary of the two washers on the other side of the Carbine. |
| + | [* icon_caution] Be wary of the two washers on the other side of the Carbine. Be sure to keep track of them once they fall out after the screws are removed |