1. Adımdaki Değişiklikler
Düzenleyen: Andrea Flores —
Düzenleme onaylandı tarafından Andrea Flores
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* orange] Remove the screen connection by using the tweezers, as shown in the first picture. |
|---|---|
| - | [* black] After the connector is removed, the device over, so the screen is facing you. |
| - | [* black] Using a heat gun or hair dryer, heat up the screen of the device to soften the glue. |
| - | [* icon_caution] Make sure the heat gun does not burn and damage any thing else that isn't the screen. |
| + | [* black] To begin removing the right speaker, lift the speaker wire with a screwdriver or Spudger as shown in the first picture. |
| + | [* black] Make sure to lift the wire up, until the glued parts of the wire are completely off. |
| + | [* icon_caution] If the wire is hard to remove, use a heat gun to soften the glue. This will make the speaker removal easier. |
| + | [* red] Once the speakers are off, remove the screw, as shown in the second picture. |
| + | [* black] After removing the screw, lift the speaker with the tweezers. |