1. Adımdaki Değişiklikler
Düzenleyen: Natalie Gibbons —
Düzenleme onaylandı tarafından Natalie Gibbons
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] To begin removing the right speaker, lift the speaker wire with a screwdriver or Spudger as shown in the first picture. |
|---|---|
| - | [* black] Make sure to lift the wire up, until the glued parts of the wire are completely off. |
| - | [* icon_caution] If the wire is hard to remove, use a heat gun to soften the glue. This will make the speaker removal easier. |
| - | [* red] Once the speakers are off, remove the screw, as shown in the second picture. |
| + | [title] Right Speaker |
| + | [* black] To begin removing the right speaker, lift the speaker wire with a screwdriver or spudger, as shown in the first picture. |
| + | [* black] Make sure to lift the wire up until the glued parts of the wire are completely separated from the device. |
| + | [* icon_caution] If the wire is hard to remove, use a heat source, such as a heat gun or a blow dryer, to soften the glue. This will make the speaker removal easier. |
| + | [* red] Once the wires are off, remove the screw, as shown in the second picture. |
| [* black] After removing the screw, lift the speaker with the tweezers. |