Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Andrea Flores —

Düzenleme onaylandı tarafından Andrea Flores

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_note] For this section of the guide, please put on some goggles for safety. Some broken glass pieces may fly out as we remove the screen.
-[* black] Starting from the top of the device, place the pry tool between the screen and the side. Begin to carefully lift the screen from the device, as shown in the first picture.
-[* black] Continue lifting the screen from the rest of the device. If at some point it becomes to difficult to lift the screen, heat the device using the heat gun at that location.
+[* red] To remove the left speaker remove the speaker wire, as shown in the first picture.
+[* icon_caution] If the wire is hard to remove, use a heat gun to soften the glue. This will make the speaker removal easier.
+[* black] Once the connection has been released, use your Spudger or tweezer to lift the speaker up, as shown in the second picture