Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: downwithvista

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] With the ethernet connectors facing you carefully open the unit like on the picture. I can best describe the opening technique as you would open a book from the rear cover.
[* black] Unplug the fan, a spudger can be of good use here.
[* icon_note] Unless you are replacing or working on the fan you don't need to unplug it.
[* icon_caution] The fan is connected to the motherboard next to the power connector. Don't lift the plate straight up or use force.force as you can ruin the connector or fan or both(and need to solder at board level or new logicboard)
[* icon_caution] The fan is connected to the motherboard next to the power connector. Don't lift the plate straight up or use force.force as you can ruin the connector or fan or both(and need to solder at board level or new logicboard)