Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

3. Adımdaki Değişiklikler

Düzenleyen: John Bayley

Düzenlenme reddedildi tarafından Ryan Lutz

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] With the rear side of the device (the side with Ethernet connectors) facing you, carefully pull up on the left side of the metal plate.
[* icon_caution] The fan is attached to the metal plate, and connected to the logic board next to the power connector. To prevent damage, do not lift the plate straight up or use force.
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the connectorconnector.However see if you can carefully lay the metal plate beside the box first as sometimes the fan cables are long enough.
[* black] Disconnect the fan from the logic board using a spudger or tweezers to pry the cable out of the connectorconnector.However see if you can carefully lay the metal plate beside the box first as sometimes the fan cables are long enough.