JD Razor 2000 Front Wheel Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Kaylan Naicker — 24 Kas 2014

Düzenleme onaylandı tarafından Kaylan Naicker

	[title] Removing the 1.75" Axle Bolt
-	[* ~~red~~] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
-	[* ~~orange~~] Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.
+	[* black] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
+	[* black] Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.
	[* icon_note] If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
	[* icon_note] If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
-	[* ~~yellow~~] Carefully pull apart the bolt and bearing from either side of the wheel.
+	[* black] Carefully pull apart the bolt and bearing from either side of the wheel.