Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Leo Rudolph

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Carefully peel off the tape that secures the SATA cable connector to the hard drive (not pictured).
+[* black] Carefully peel off the tape that secures the SATA cable connector to the hard drive.
[* black] Pull the SATA cable connector straight out of the hard drive.
[* black] Carefully peel off the two black sticky pads (one visible in picture) from the hard drive and stick them to your new hard drive in the same locations.