3. Adımdaki Değişiklikler
Adım Satırları
| + | [* red] Locate the ribbon cable which connects the top cover the main PCB board. |
|---|---|
| + | [* black] Use a plastic spudger tool to carefully pry off the connector. |
| + | [* icon_caution] Use caution when handling ribbon connectors and their connectors. |
| + | [* orange] Take note of where this fiber optic cable connects to the main PCB board. |
| + | [* icon_note] The cable will slide out of the connector when you pull the top cover off. You will need to remember to slide this cable back into the connector with a pair of tweezers when reinstalling the top cover. This cable is crucial for the function of the camera flash. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi