4. Adımdaki Değişiklikler
Adım Satırları
| + | [* red] Disconnect these two cables connected to the DC PCB board. |
|---|---|
| + | [* black] Use the same method as with removing the microphone cable, except with using a flathead 3.0mm screwdriver. |
| + | [* black] Gently wiggle the flathead screwdriver back and forth until the connectors comes free. |
| + | [* icon_note] If you do not have a flathead 3.0mm screwdriver, another slightly larger flathead screwdriver should work. |
| + | [* black] Gently lift the top cover up and off of the camera body, being careful that the loose cables do not snag on anything. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi