2. Adımdaki Değişiklikler
Düzenleyen: Melissa Pavelka —
Düzenleme onaylandı tarafından Marty Rippens
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] There are two miniature SMD LEDs. One is clear and one is yellow. Unsolder the YELLOW colored LED. Replace with another high intensity SMD LED. The anode (+) is marked on the circuit board and is away from the infrared receiver side. |
|---|---|
| + | [* black] There are two miniature SMD LEDs. One is clear and one is yellow. Unsolder the YELLOW colored LED. Replace with another high intensity SMD LED. The anode (+) is marked on the circuit board and is located away from the infrared receiver side. |
| [* icon_note] SMD LEDs are difficult to find as a spare part. You can carefully ground down a normal sized LED with a Dremil until it is the correct fit. | |
| [* black] Reassemble the Apple TV following the reverse of these to steps used to disassemble it. |