5. Adımdaki Değişiklikler
Düzenleyen: Sarah Westberg —
Düzenleme onaylandı tarafından Sarah Westberg
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Place end of the soldering iron to end of the wire on the copper cylinder to detach wire. |
|---|---|
| - | [* black] To replace alarm switch, attach one end of new alarm switch wire to the copper cylinder |
| - | [* black] Use Phillips "Screwdriver #1" to install the switch screws. |
| + | [* black] Place the end of the soldering iron to the end of the wire on the copper cylinder to detach the wire. |
| + | [* icon_note] If you are unfamiliar with soldering, take a look at this article,[guide|750|How to Solder and Desolder Connections]. |
| + | [* black] To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder. |
| + | [* black] Use a Phillips #1 screwdriver to install the switch screws. |