Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Tim Gelvin

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Take the new DVD drive and the old circuit board. Solder the 6 wires from the new drive onto the old circuit board. Reinsert the ribbon cables on the circuit board. Put the bottom lid on and reinsert the 4 screws. Plug the SATA and power cables into the drive.
[* black] Take the new DVD drive and the old circuit board. Solder the 6 wires from the new drive onto the old circuit board. Reinsert the ribbon cables on the circuit board. Put the bottom lid on and reinsert the 4 screws. Plug the SATA and power cables into the drive.