Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Tim Gelvin

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Take the new DVD drive and the old circuit board. Solder the 6 wires from the new drive onto the old circuit board.
[* black]
Reinsert the ribbon cables on the circuit board.
[* black] Replace the 2 screws to hold the circuit board onto the drive.
[* black]
Put the bottom lid on and reinsert the 4 screws.
[* black] Plug the SATA and power cables into the drive.
[* black] Take the new DVD drive and the old circuit board. Solder the 6 wires from the new drive onto the old circuit board.
[* black]
Reinsert the ribbon cables on the circuit board.
[* black] Replace the 2 screws to hold the circuit board onto the drive.
[* black]
Put the bottom lid on and reinsert the 4 screws.
[* black] Plug the SATA and power cables into the drive.