Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

20. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
[* black] Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.
[* icon_note] TheThere are quite a few things to avoid beneath the lower bezel, so study the third image shows the two antennas and the homeclosely:
[* red] Antennas
[* orange] Home
button cavity in the lower case of the iPad.
[* yellow] Digitizer cable
[*
black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.
[* icon_note] TheThere are quite a few things to avoid beneath the lower bezel, so study the third image shows the two antennas and the homeclosely:
[* red] Antennas
[* orange] Home
button cavity in the lower case of the iPad.
[* yellow] Digitizer cable
[*
black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Resim 3

Önceki resim yok

Eklendi