Ana içeriğe geç

20. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
+[* black] Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.
+[* icon_note] The third image shows the two antennas and the home button cavity in the lower case of the iPad.
+ [* black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi