Skip to main content

24. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı by Sam Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_caution] Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.
[* black] At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along the display cable edge.
[* icon_note] If you encounter a significant amount of resistance, leave the picks in place, reheat, and reapply the iOpener to the problem areas.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi