Brother MFC-490CW Print head Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Heather Fitzgerald — 19 Şub 2022

Düzenleme onaylandı tarafından Heather Fitzgerald

	[title] Separate the arm holding scanner unit
-	[* icon_note] Before removing the unit, ~~apply 2 or 3 pieces of~~ tape to secure the top ~~and bottom of~~ the ~~unit~~.
-	[* black] Lift the scanner unit.
-	[* black] Gently twist the top portion of the arm~~. The top portion should~~ release from the scanner unit.
-	[* black] Rotate the arm ~~approximately~~ 45 degrees to remove the bottom portion of the arm from the device.
+	[* icon_note] Before removing the scanner unit, use tape to secure the top to the bottom.
+	[* black] Lift the scanner unit to expose the arm.
+	[* black] Gently twist the top portion of the arm to release it from the scanner unit.
+	[* black] Rotate the arm 45 degrees to remove the bottom portion of the arm from the device.