Brother MFC-490CW Print head Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Heather Fitzgerald — 20 Şub 2022

Düzenleme onaylandı tarafından Heather Fitzgerald

	[title] Separate the arm holding scanner unit
-	[* icon_note] Before removing the ~~scanner~~ unit, ~~use~~ tape to secure the top to the ~~bottom~~.
-	[* black] Lift the scanner unit ~~to expose the arm~~.
-	[* black] Gently twist the top portion of the arm to release it from the scanner unit.
-	[* black] Rotate the arm 45 degrees to remove the bottom portion of the arm from the device.
+	[* icon_note] Before removing the unit, apply 2 or 3 pieces of tape to secure the top and bottom of the unit.
+	[* black] Lift the scanner unit.
+	[* black] Gently twist the top portion of the arm. The top portion should release from the scanner unit.
+	[* black] Rotate the arm approximately 45 degrees to remove the bottom portion of the arm from the device.