Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the plastic retention pin on the faceplate
-[* icon_reminder] ***Special note: There is a plastic pin from the factory here. You will have to remove it to remove the faceplate.***
-[* black] If the unit has never been worked on, there will be a small plastic pin here. Take your time to get this out, since it can be quite difficult. If you break it in the process, you can get away without replacing it if you do not want to replace it. However, you should try not to break it if you can help it.
+[* icon_reminder] ***Note: There is a plastic pin from the factory here. You will have to remove it to remove the faceplate.***
+[* icon_note] If you break the pin or decide not to put it in, it isn't essential. However, you wil notice a little wiggle room on this side of the unit if you choose to do this. The metal cover is more then enough if you break or disregard this pin during reassembly.
+[* black] If the unit has never been worked on, there will be a small plastic pin here. This is very difficult to remove, so you have to take your time. If you break it, you can reassemble the unit without it with no major consequences. However, you should try and keep it in one piece.