Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the four screws holding the faceplate on from the bottom of the amp.
-[* icon_reminder] Put these in a safe place. These are different from the other screws.
-[* icon_note] One screw is not shown. You should be able to find it, though.
+[title] Remove the bottom faceplate screws
+[* black] Remove the four screws holding the faceplate on from the receiver. These screws will be different, so it will not be possible to mix them up with the other screws you will remove later.
+[* icon_note] There is a 4th screw point on the faceplate that did not have a screw on this one. I am not sure if all of them have it or not, but it was missing on mine. If you have the missing screw that mine does not have, put it with the other 3 screws. I have marked this screw with a green marker.

Resim 1

Eski Sürüm

Yeni Sürüm