Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the knob from the control with the problem
-[* black] Remove the control you are having a problem with. On this example, it was the volume control. You do have to remove the circuit board later. The knob will also have to be removed, so this is just to get it out of the way.
-[* icon_reminder] If the unit has never been repaired, this will take a moderate amount of force. Do not force it, but also do not use too much pressure at the same time. It's best to take your time if you have never worked on the receiver.
+[* black] Remove the control knob of the switch you are having a problem with. This one had a problem with the volume control specifically.
+[* icon_reminder] If the unit has never been repaired, this may take a moderate amount of force. Do not force it, but don't be afraid to use some pressure if you have to. Units that have never had a knob fall off will be harder then ones that have to remove.