Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick


Adım Satırları

-[* black] Remove the volume control from the amplifier. You don't have to remove the input control.
-[* icon_reminder] This may take a bit of force the first time. Take your time if you never worked on the unit.
+[title] Remove the knob from the control with the problem
+[* black] Remove the control you are having a problem with. On this example, it was the volume control. You do have to remove the circuit board later. The knob will also have to be removed, so this is just to get it out of the way.
+[* icon_reminder] If the unit has never been repaired, this will take a moderate amount of force. Do not force it, but also do not use too much pressure at the same time. It's best to take your time if you have never worked on the receiver.