Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disconnect the front panel flex cables
-[* icon_reminder] If your receiver has the iPod Direct feature, special attention to the front panel is required.
-[* red] If your unit has the iPod Direct feature, disconnect the cable that plugs into the board. The board is screwed into the front panel and will need to be removed in a later step.
-[* orange] Once the cable going to the board on the faceplate is disconnected, disconnect the flat flex that interfaces with the receiver.
+[* icon_caution] ***If your receiver has the iPod Direct feature, special attention to the front panel is required.***
+[* red] ***iPod Direct only*** For iPod Direct models, disconnect the wire that plugs into the board as shown in the 1st picture. This board will need to be removed later on.
+[* orange] Disconnect the flatflex that connects the front panel display to the rest of the receiver.