Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Nick

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the iPod Direct board
-[* black] Remove the 4 screws holding the iPod Direct board in the faceplate. This step also removes the plastic support for the iPod Direct board, and will come out with the board. Set the board aside once you remove it.
-[* icon_reminder] If you do not have the iPod Direct board, you only need to remove the green and red screws. The Orange and Yellow screws do not apply to these units.
+[* icon_caution] ***If your receiver does NOT have the iPod Direct option, some adjustments are required.***
+[* black] ***iPod Direct:*** On these receivers, remove the 4 marked screws. Once this is done, set the board aside.
+[* black] ***Non iPod Direct:*** On these receivers, remove the Green and Red screws. Your receiver is unlikely to have the additional screws because there is no need for them.